Home » Publications

Publications

[Refereed Archival Publications]

  • A. Phillips, C. Fiorello, R. M. Baden, J. Liu, N. Burmas, C. A. Ruvalcaba, R. Monroy, F. C. Mohr, R. Gehring, J.-P. Delplanque, K. V. Clemons, D. A. Stevens, and L. A. Tell, “Amphotericin B concentrations in healthy mallard ducks (Anas platyrhynchos) following a single intratracheal dose of liposomal amphotericin B using an atomizer,” Medical Mycology,Vol. 56, No. 3, pp. 322–331, 2018. [DOI]
  • K. O. Zamuruyev, E. Boras, D. R. Pettit, A. A. Aksenov, J. D. Simmons, B. C. Weimer, M. Schivo, N. J. Kenyon, J.-P. Delplanque, C. E. Davis “Effect of collection temperature on metabolite content in exhaled breath condensate,” Analytica Chimica Acta, Vol. 1006, pp. 49-60 (2018).[DOI]
  • J. Y. Adams, M. K. Lieng, B. T. Kuhn, G. B. Rehm, E. C. Guo, S. L. Taylor, J.-P. Delplanque, N. R. Anderson, “Development and Validation of a Multi-Algorithm Analytic Platform for the Study of Off-Target Mechanical Ventilation,” Scientific Reports, Vol. 7, 14980, 2017. [DOI]
  • G. B. Rehm, B. T. Kuhn, J.-P. Delplanque, E. C. Guo, M. K. Lieng, J. Nguyen, N. R. Anderson, J. Y. Adams, “Development of a Research Oriented System for Collecting Mechanical Ventilator Waveform Data,” Journal of the American Medical Informatics Association, Vol. 25, No. 3, pp. 295-299, 2018. [DOI]
  • O. Zamuruyev, A. A. Aksenov, J. F. Brown, A. Pasamontes, D. R. Pettit, S. Foutouhi, B. C. Weimer, M. Schivo, N. J. Kenyon, J.-P. Delplanque, C. E. Davis “Human breath metabolomics using an optimized non- invasive respiratory sampler for health diagnostics,” Journal of Breath Research, Vol. 11, No. 1, 016001, 2017.
    Selected to be part of the Journal of Breath Research Highlights of 2017.
  • Scipioni Bertoli, A. J. Wolfer, M. J. Matthews, J.-P. R. Delplanque, J. M. Schoenung, “On the Limitations of Volumetric Energy Density as a Design Parameter during Selective Laser Melting,” Materials & Design, Vol. 113, pp. 331-340, 2017.
  • O. Zamuruyev, A. A. Aksenov, M. Baird, A. Pasamontes, C. Parry, S. Foutouhi, S. Venn-Watson, B. C. Weimer, J.-P. Delplanque, C. E. Davis “Enhanced non-invasive respiratory sampling from bottlenose dolphins for optimum breath metabolomics measurements,” Journal of Breath Research, Vol. 10, No. 4, 046005, 2016.
  • S. Williamson and J.-P. Delplanque “Investigation of Dynamic Abnormal Grain Growth Using the Monte Carlo Potts Method” Computational Materials Science, Vol. 124, pp. 114–129, November 2016.
  • Hansel, M. Mori, M. Fujishima, Y. Oda, G. Hyatt, E.J. Lavernia, and J.-P. Delplanque, “Study on consistently optimum deposition conditions of typical metal material using additive/subtractive hybrid machine tool,” Procedia CIRP, Vol. 46, pp. 579–582, 2016.
  • Fraga, J.-P. Delplanque, N. Yang, E.J. Lavernia, and T. Monson “High Pressure FAST-of Nanocrystalline Barium Titanate,” Ceramics International , Vol. 42, pp. 13868-13875, 2016.
  • Nourgaliev, H. Luo, B. Weston, A. Anderson, S. Schofield, T. Dunn, J.-P. Delplanque, “Fully-Implicit Orthogonal Reconstructed Discontinuous Galerkin Method for Fluid Dynamics with Phase Change,” Journal of Computational Physics , Vol. 305, pp. 964-996, January 2016.
  • Gaiser, P. Erickson, P. Stroeve, J.-P. Delplanque, “An experimental investigation of design parameters for pico-hydro Turgo turbines using a response surface methodology” Renewable Energy, Vol. 85, pp. 406–418, January 2016.
  • S. Williamson and J.-P. Delplanque “Strain Energy Limitations in Monte Carlo Potts Modeling of Grain Growth” Computational Materials Science, Vol. 108, Part A, pp. 48–55, October 2015.
  • M. Kwan, A.G. Fung, P.A. Jansen, M. Schivo, N.J. Kenyon, J.-P. Delplanque, C.E. Davis, “Personal Lung Function Monitoring Devices for Asthma Patients,” IEEE Sensors Journal, Vol. 15, No. 4, pp. 2238-2247, April 2015.
    Top 25 most downloaded IEEE Sensors Journal papers (February 2015).
  • A. Aksenov and L. Yeates and A. Pasamontes and C. Siebe and Y. Zrodnikov and J. Simmons and M. M. McCartney and J.-P. Delplanque and R. S. Wells and C. E. Davis, “Metabolite Content Profiling of Bottlenose Dolphin Exhaled Breath,” Analytical Chemistry Vol. 86  pp.10616-10624,  2014.
  • O. Zamuruyev, H. K. Bardaweel, C. J. Carron, N. J. Kenyon, O. Brand, J.-P. Delplanque, C. E. Davis, “Continuous Droplet Removal upon Dropwise Condensation of Humid Air on a Hydrophobic Micropatterned Surface” Langmuir  Vol. 30, No. 33, pp. 10133—10142, 2014.
  • Zheng, D. Ashford, Y. Zhou, S.N. Mathaudhu, J.-P. Delplanque, E.J. Lavernia, “Influence of Mechanically Milled Powder and High Pressure on Spark Plasma Sintering of Mg-Cu-Gd Metallic Glasses,” Acta Materialia, Vol. 61, No. 12, pp. 4414-4428, 2013.
  • Y. Xiong, W.H. Hofmeister, J.E. Smugeresky, J.-P. Delplanque, J.M. Schoenung, ”Investigation of Atypical Molten Pool Dynamics in Tungsten Carbide-Cobalt During Laser Deposition using In-Situ Thermal Imaging,” Applied Physics Letters, Vol. 100, No. 3, pp. 034101-4, 01, 2012. [DOI]
  • A. Bumatay, R. Chan, K. Lauher, A. M. Kwan, T. Stoltz, J.-P. Delplanque, N. J. Kenyon, C. E. Davis, ”Coupled Mobile Phone Platform with Peak Flow Meter Enables Real-Time Lung Function Assessment,” IEEE Sensors Journal, Vol. 12, No. 3, pp. 685-691, March 2012. [DOI]
  • Z. G. Wang, S. Kobayashi, I. Matsumoto, K. Yamazaki, X. Cheng, and J. P. Delplanque. ”Systematic study of ultrasonic vibration assisted electron beam irradiation process,” Journal of Manufacturing Science and Engineering, Vol. 131, No. 4, pp. 041006-8, 08, 2009. [DOI]
  • M. Rein and J.-P. Delplanque ”The Role of Air Entrainment on the Outcome of Drop Impact on a Solid Surface,” Acta Mechanica. Vol. 201, No. 1-4, pp. 105-118, 2008. [DOI]
  • Z. Wang, J.-P. Delplanque, K. Yamazaki, Y. Daichi, S. Sano, ”Study on vibration assisted electron beam machining process, Part I: Simulation of vibration assisted solidification process,” NAMRI/SME Transactions, Vol. 36, pp. 501-508, 2008.
  • Z. Wang, J.-P. Delplanque, K. Yamazaki, Y. Daichi, S. Sano,, ”Study on vibration assisted electron beam machining process, Part II: Design and analysis of the vibration structure,” NAMRI/SME Transactions, Vol. 36, pp. 509-515, 2008.
  • K. M. McHugh, Y. Lin, Y. Zhou, S. B. Johnson, J-P Delplanque, and E. J. Lavernia, ”Microstructure Evolution during Spray Rolling and Heat Treatment of 2124 Al,” Materials Science and Engineering A, Vol. 447, pp. 26-34, 2008. [DOI]
  • A.U. Modak, A. Abbud-Madrid, J-P Delplanque, and R.J. Kee, ”The Effect of Mono-Dispersed Water Mist on the Suppression of Laminar Premixed Hydrogen-, Methane-, and Propane-Air Flames,” Combustion and Flame, Vol. 144, pp. 103-111, 2006. [DOI]
  • M. Paciaroni, M. Linne, T. Hall, J.-P. Delplanque, and T. Parker, ”Single-Shot Two-Dimensional Ballistic Imaging of the Liquid Core in an Atomizing Spray,” Atomization and Sprays, Vol. 16(1), pp. 51-70, 2006. [DOI]
  • C. Skokan, M. G. Simões, J.-P. Delplanque, J. Gosink, ”ABET 2000 Challenges in Curricular Compression: Fluids and Circuits, a Pilot 2+1+1 Approach,” IEEE Transactions on Education, Vol. 48, pp. 503 -512, 2005. [DOI]
  • K. M. McHugh, J-P Delplanque, S. B. Johnson, E. J. Lavernia, Y. Zhou, and Y. Lin, ”Spray Rolling Aluminum Alloy Strip,” Materials Science and Engineering, Vol. 383, pp. 96-106, 2004. [DOI]
  • S.Q. Armster, J-P Delplanque, M. Rein, and E.J. Lavernia, ”Thermo-Fluid Mechanisms Controlling Droplet-Based Materials Processes,” International Materials Reviews, Vol. 47, Part 6, pp. 265-301, 2002.[DOI]
  • C.S. Lengsfeld, J-P Delplanque, and D. Dunn-Rankin, ”Breakup Transitions within Dense Sprays,” Atomization and Sprays, Vol. 12, No. 4, pp. 501-512, 2002. [DOI]
  • C.S. Lengsfeld, J-P Delplanque, V.H. Barocas, and T.W. Randolph ”Mechanisms Governing Microparticle Morphology during Precipitation by a Compressed antisolvent: Atomization vs. Nucleation and Growth,” Journal of Physical Chemistry B, Vol. 104, No. 12, pp. 2725-2735, 2000. [DOI]
  • S. Q. Armster, J-P Delplanque, W.-H. L. Lai, and E.J. Lavernia ”Mono-Size Droplet Deposition as a Means to Investigate Droplet Behavior during Spray Deposition,” Metallurgical Transactions, B, Vol. 31, No. 6, pp. 1333-1344, 2000. [DOI]
  • J-P Delplanque, E.J. Lavernia and R.H. Rangel “Analysis of In-Flight Oxidation During Reactive Spray Atomization and Deposition Processing of Aluminum,” Journal of Heat Transfer, vol. 122, pp. 126-133, February, 2000. [DOI]
  • J-P Delplanque, W. D. Cai, D. White, and E. J. Lavernia ”Evaluating Porosity in Spray Deposited A2 Tool Steel,” International Journal of Powder Metallurgy, Vol. 35, No. 2, pp. 47-55,1999.
  • S. L. Dai, J-P Delplanque, and E. J. Lavernia “Effect of Secondary Phase Particles on Post-Recrystallization Grain Growth in Reactive Spray Deposited 5083 Al Alloys,” Journal of Materials Research, Vol. 14, No. 7, pp. 2814, 1999. [DOI]
  • J-P Delplanque and W. A. Sirignano, “Transcritical Vaporization of Liquid Fuels and Propellants,” Journal of Propulsion and Power, Vol. 15, No. 6, November-December, pp. 896-902, 1999. [DOI]
  • J-P Delplanque and R. H. Rangel ”Numerical Simulation of Liquid-Jet Overflow in Droplet Deposition Processes,” Acta Materialia, Vol. 47, No. 7, pp. 2207-2213, 1999. [DOI]
  • S. L. Dai, J-P Delplanque, and E. J. Lavernia “Grain Growth in Reactive Spray Deposited 5083 Alloys,” Scripta Materialia, Vol. 40, No. 2, pp. 145-151, 1998. [DOI]
  • J-P Delplanque and R. H. Rangel ”A Comparison of Models, Numerical Simulations, and Experimental Results in Droplet Deposition Processes,” Acta Materialia, Vol. 46, No. 14, pp. 4925-4933, 1998. [DOI]
  • S. L. Dai, J-P Delplanque, and E. J. Lavernia ”Microstructural Characteristics of 5083 Al Alloys Processed by Reactive Spray Deposition for Net-Shape Manufacturing,” Metallurgical Transactions, Vol. 29A, October, pp. 2597-2611, 1998. [DOI]
  • J-P Delplanque, S. L. Dai, R.H. Rangel, and E. J. Lavernia ”Reactive Spray Atomization and Deposition of Aluminum Alloys: Microstructure and Dispersoid Characterization,” Journal of Materials Synthesis and Processing, Vol. 5, pp. 87-104, 1997.
  • J-P Delplanque, E. J. Lavernia and R. H. Rangel ”Numerical Investigation of Multi-Phase Flow Induced Porosity Formation in Spray Deposited Materials,” International Journal of Non-Equilibrium Processing, Vol. 10, No. 2, pp. 185-199, 1997.
  • W. D. Cai, J-P Delplanque, R. H. Rangel, and E. J. Lavernia ”Spray Atomization and Deposition of Tantalum Alloys,” Acta Materialia, Vol. 45, No. 12, pp. 5233-5243, 1997. [DOI]
  • J-P Delplanque and R.H. Rangel ”An Improved Model for Droplet Solidification on a Flat Surface,” Journal of Materials Science, Vol. 32, No. 6, pp. 1519-1530, 1997. [DOI]
  • J-P Delplanque, E. J. Lavernia and R. H. Rangel ”Multi-Directional Solidification Model for the Description of Micro-Pore Formation in Spray Deposition Processes,” Numerical Heat Transfer, Part A, vol. 30, pp. 1-18, 1996. [DOI]
  • J-P Delplanque and W. A. Sirignano, “Transcritical Liquid Oxygen Droplet Vaporization: Effect on Rocket Combustion Instability,” Journal of Propulsion and Power, vol. 12, No. 2, pp. 349-357, 1996. [DOI]
  • J-P Delplanque and B. Potier ”Rocket Engine Supercritical Combustion: A Review of the Issues and Current Research,” La Recherche Aérospatiale, No. 5, pp. 299-309, 1995.
  • J-P Delplanque and W. A. Sirignano “Transcritical Vaporization and Combustion of LOX Droplet Arrays in a Convective Environment,” Combustion Science and Technology, vol. 105, pp. 327-344, 1995. [DOI]
  • J-P Delplanque and W. A. Sirignano “Boundary Layer Stripping Effects on Droplet Transcritical Convective Vaporization,” Atomization and Sprays, vol. 4, pp. 325-349, 1994. [DOI]
  • J-P Delplanque and W. A. Sirignano “Numerical Study of the Transient Vaporization of an Oxygen Droplet at Sub- and Supercritical Conditions,” International Journal of Heat and Mass Transfer, vol. 36, no. 2, pp. 303-314, 1993. [DOI]
  • J-P Delplanque and R.H. Rangel “Droplet Stream Combustion in the Boundary Layer Near a Wall,’‘ Combustion Science and Technology, vol. 78, pp. 97-115, 1991. [DOI]
  • J-P Delplanque, R.H. Rangel, and W. A. Sirignano “Liquid-Waste Incineration in a Parallel Stream Configuration: Parametric Study,” Proceedings of the Combustion Institute, Vol. 23, pp.887-894, 1990.

[Book Chapters and Articles]

  • A. Panigrahy, J-P Delplanque, C. E. Davis, ”Future Directions in Breath Sensors,” Chapter 7 in Biological and Medical Sensor Technologies, Ed. K. Iniewski, CRC Press, pp. 171-200, 2011.
  • J-P Delplanque, S. B. Johnson, L. L. Shaw, and Y. Zhou, ”Spray Deposition and coating processes,” Chapter 11 of CRC Materials Processing Handbook (section on ”Microstructure change processes”), Eds. J. R. Groza, E. J. Lavernia, and J. F. Shackelford, CRC, 2007 .
  • C. Barrot and J.-P. Delplanque. ”Liquid microflows: Particularities and modeling.” In Microfluidics, Ed. S. Colin. Wiley, 2010.[ J-P Delplanque, ”Micro-écoulements Liquides,” (In French; Liquid Microflows), Chapter 3 of Microfluidique, Ed. S. Colin, Traité EGEM, Vol. 6, Hermès, 2004. ]
  • E. J. Lavernia and J-P Delplanque, ”Spray Casting: Applications,” in Encyclopedia of Materials: Science and Technology, Eds. K. H. J. Buschow, et al., Elsevier Science, pp. 8771-8776, 2001.
  • W. A. Sirignano, J-P Delplanque, C.H. Chiang, and R. Bhatia, ”Liquid-Propellant Droplet Vaporization: A Rate Controlling Process for Rocket Combustion Instabilities,” Chapter 11 in Liquid Rocket Engine Combustion Instability, Edited by V. Yang and W.E. Anderson, Progress in Astronautics and Aeronautics, AIAA, vol. 169, pp. 307-343, 1995.

UC Davis/J-P Delplanque (2018)